Ankom TDF Dietary Manual do Utilizador descarregar pdf (Página 75)

Operator’s Manual

Rev E 12/2/14 pg. 75

Motor Test

When you press the Motor Test button on the Diagnostics screen, the following screen will be displayed.

This diagnostic allows you to test the motor at different speeds (default is 240 RPM) and directions using different amounts of

fluid. Before pressing the GO button to start the Motor Test, it is recommended that you first open at least one Supply Valve and

one Output Valve. To do that, press the Set Valves button. The following screen will be displayed.

This diagnostic also displays the maximum pressure read from the vacuum sensor during the test. The value starts at zero and

will display a value while the motor is running and when it stops. This can be used for troubleshooting.

Running the Motor Test could leave fluid in some of the lines. After running a

Motor Test, always run the Clear IDF/SDF Lines diagnostic.

←

Set Valves

Amylase Supply

(closed)

HCl Supply

(closed)

AMG Supply

(closed)

Protease Supply

(closed)

Water Supply

(closed)

EtOH95 Supply

(closed)

EtOH78 Supply

(closed)

Buffer Supply

(closed)

IDF Inlet

(open)

Waste

(open)

SDF Inlet

(open)

Output

Supply

←

Motor Test

Set Valves

Motor

Direction

(FWD)

120 RPM

240 RPM

Motor Speed

10.0

Amount (ml)

00.0

Max Vacuum (psi)

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 95 96

Comentários a estes Manuais

Sem comentários

Ankom TDF Dietary Manual do Utilizador Página 75

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Ankom TDF Dietary