Ankom 200 Series Manual do Utilizador Página 1

Consulte online ou descarregue Manual do Utilizador para Instrumentos de medida Ankom 200 Series. ANKOM 200 Series User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir

Resumo do Conteúdo

Página 1 - Operator’s Manual

Operator’s Manual 2052 O’Neil Rd, Macedon NY 14502 Telephone: (315) 986-8090 Fax: (315) 986-8091 www.ankom.com Rev C 1/14/15

Página 2

Operator’s Manual pg. 10 Rev C 1/14/15 Instrument Installation Site Requirements To install and operate the ANKOM200 Fiber Analyzer you wil

Página 3 - Table of Contents

Operator’s Manual Rev C 1/14/15 pg. 11 Fiber Analysis Support Items The following support items are needed to perform the fiber analy

Página 4

Operator’s Manual pg. 12 Rev C 1/14/15 This page intentionally left blank

Página 5 - Operating Environment

Operator’s Manual Rev C 1/14/15 pg. 13 ADF Analysis ADF Calculation ADF contained within a food or feed sample can be calculated usin

Página 6 - Contact Information

Operator’s Manual pg. 14 Rev C 1/14/15 8. Record the weight of the sample (W2). 9. Seal the filter bag within 4mm of its open end. Keep

Página 7 - Instrument Description

Operator’s Manual Rev C 1/14/15 pg. 15 ADF Analysis Procedure using the ANKOM200 Fiber Analyzer To perform the ADF analysis on prepar

Página 8

Operator’s Manual pg. 16 Rev C 1/14/15 17. Repeat steps 12 - 16 to accomplish the second rinse. 18. Make sure that the HHEEAATT button i

Página 9 - Safety Precautions

Operator’s Manual Rev C 1/14/15 pg. 17 NDF Analysis NDF Calculation NDF contained within a food or feed sample can be calculated usin

Página 10 - Instrument Installation

Operator’s Manual pg. 18 Rev C 1/14/15 8. Record the weight of the sample (W2). 9. Seal the filter bag within 4mm of its open end. Keep

Página 11 - Fiber Analyzer

Operator’s Manual Rev C 1/14/15 pg. 19 NDF Analysis Procedure using the ANKOM200 Fiber Analyzer To perform NDF analysis on prepared s

Página 12

This page intentionally left blank

Página 13 - ADF Analysis

Operator’s Manual pg. 20 Rev C 1/14/15 18. After the third rinse, open the Vessel Lid and remove the Bag Suspender from the Vessel. 19. R

Página 14

Operator’s Manual Rev C 1/14/15 pg. 21 Crude Fiber Analysis Crude Fiber Calculation Crude Fiber contained within a food or feed sampl

Página 15

Operator’s Manual pg. 22 Rev C 1/14/15 5. Place an empty filter bag in the Bag Holder in an open position. 6. Tare the weight of the e

Página 16

Operator’s Manual Rev C 1/14/15 pg. 23 Crude Fiber Analysis Procedure using the ANKOM200 Fiber Analyzer To perform Crude Fiber analys

Página 17 - NDF Analysis

Operator’s Manual pg. 24 Rev C 1/14/15 16. When the Timer sounds, the rinse is complete. Slowly open the Exhaust Valve to drain the hot wa

Página 18

Operator’s Manual Rev C 1/14/15 pg. 25 37. Remove the samples from the oven and place them directly in a Desiccant Pouch.

Página 19

Operator’s Manual pg. 26 Rev C 1/14/15 This page intentionally left blank

Página 20

Operator’s Manual Rev C 1/14/15 pg. 27 Periodic Maintenance Initial Maintenance (during the first 20 hours of operation) Follow the

Página 21 - Crude Fiber Analysis

Operator’s Manual pg. 28 Rev C 1/14/15 Replacing the Fuse in a 120V instrument To replace the fuse in a 120V ANKOM200 Fiber Analyzer, follo

Página 22

Operator’s Manual Rev C 1/14/15 pg. 29 Check the Agitation System The agitation system should be checked every three to six months

Página 23

Table of Contents Introduction ...

Página 24

Operator’s Manual pg. 30 Rev C 1/14/15 Check the Bag Suspender The Bag Suspender should be checked every three to six months or

Página 25

Operator’s Manual Rev C 1/14/15 pg. 31 Appendix A – ADF Method Acid Detergent Fiber in Feeds - Filter Bag Technique (for A200 and A20

Página 26

Operator’s Manual pg. 32 Rev C 1/14/15 Calculations % ADF (as-received basis) = 100 x (W3 – (W1 x C1)) W2 Where: W1 = Bag tare weight

Página 27 - Periodic Maintenance

Operator’s Manual Rev C 1/14/15 pg. 33 Appendix B – NDF Method Neutral Detergent Fiber in Feeds - Filter Bag Technique (for A200 and

Página 28

Operator’s Manual pg. 34 Rev C 1/14/15 Calculations % NDF (as-received basis) = 100 x (W3 – (W1 x C1)) W2 Where: W1 = Bag tare weight

Página 29

Operator’s Manual Rev C 1/14/15 pg. 35 Appendix C – Crude Fiber Method (AOCS Ba 6a-05) Crude Fiber Analysis in Feeds - Filter Bag Tec

Página 30 - Storage

Operator’s Manual pg. 36 Rev C 1/14/15 Calculations % Crude Fiber = 100 x (W3 – (W1 x C1)) W2 Where: W1 = Bag tare weight W2 = Sample

Página 31 - Appendix A – ADF Method

Operator’s Manual Rev C 1/14/15 pg. 37 Collaborative Laboratory No.Rep Whole CornCattle FeedAlfalfaWhole SoyPoultry StarterCalf

Página 32

Operator’s Manual pg. 38 Rev C 1/14/15 This page intentionally left blank

Página 33 - Appendix B – NDF Method

Operator’s Manual Rev C 1/14/15 pg. 39 Appendix D – Wiring Diagram

Página 34

This page intentionally left blank

Página 35

Automation saves time and money! ANKOM Technology is an international company with products that include… TDF Dietary Fiber Analyzer  Autom

Página 36

Operator’s Manual Rev C 1/14/15 pg. 5 Introduction ANKOM Technology designs, manufactures, and markets instruments and suppor

Página 37 - Rev C 1/14/15 pg. 37

Operator’s Manual pg. 6 Rev C 1/14/15 Contact Information At ANKOM Technology we are committed to your total satisfaction and therefore alw

Página 38

Operator’s Manual Rev C 1/14/15 pg. 7 Instrument Description General Description The ANKOM200 Fiber Analyzer is designed to efficie

Página 39 - Appendix D – Wiring Diagram

Operator’s Manual pg. 8 Rev C 1/14/15 Internal Components (Rear View) External Components (Rear View) Maintenance Alert Collector (part #

Página 40

Operator’s Manual Rev C 1/14/15 pg. 9 Safety Precautions Hazardous Pressure – The contents of the Vessel are hot and unde

Comentários a estes Manuais

Sem comentários